9/14/2023 0 Comments Vuescan big sur![]() # Most Scanners connected to the parallel port or other proprietary ports # Not checking for parallel port scanners. ![]() Try scanimage -L and read the backend's manpage. # Your USB scanner was (probably) detected. # you have loaded a kernel SCSI driver for your SCSI adapter.įound USB scanner (vendor=0x04f9, product=0x0328 ) at libusb:002:016 If you expected something different, make sure that # scanner is powered up and properly connected to your computer. # result is different from what you expected, first make sure your # sane-find-scanner will now attempt to detect your scanner. Which came with this software (README, FAQ, manpages). If you were expecting something different,Ĭheck that the scanner is plugged in, turned on and detected by the Scanimage (sane-backends) 1.0.32 backend version 1.0.32 Scanimage: sane_read: Error during device I/O Scanimage: min/max graylevel value = 255/0 libusb: error bulk transfer failed (dir = Out): no connection to an IOService (code = 0xe00002c0) libusb: debug pipe 1 on interface 0 matches libusb: debug converting ep address 0x07 to pipeRef and interface libusb: warning ClearPipeStall: no connection to an IOService libusb: error bulk transfer failed (dir = In): no connection to an IOService (code = 0xe00002c0) libusb: debug pipe 2 on interface 0 matches ![]() libusb: debug converting ep address 0x88 to pipeRef and interface
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |